Skip to content

Court Restoration

Court Resurfacing Repairs & Maintenance in Orlando

A cracked, peeling, or slippery court surface restored to safe, even play, with the right scope confirmed before any work begins.

  • On-Site Evaluation
  • Written Estimate
  • Spot Repair or Full Resurface
  • Residential & Community Courts
Sports Court Resurfacing carried out by a professional sports court builder

What Goes Wrong

The repair mistakes that make courts fail again within a season

Cheap or rushed resurfacing skips the steps that determine whether new coating will actually hold.

Recoating Over Failure

Applying new acrylic over a substrate that has lost adhesion traps the failure underneath and the coating peels again within months.

Adhesion Check First

The builder tests coating adhesion and substrate integrity before any recoating is quoted or scheduled.

Skipping Pressure Wash

Orlando’s humidity promotes mildew and algae growth that prevents patch filler and acrylic from bonding to the surface correctly.

Clean Surface, Then Fill

Pressure washing removes all biological growth and loose coating before any filler or acrylic is applied.

Rigid Crack Filler

Using a non-flexible filler in surface cracks means the repair breaks apart again as the slab expands and contracts with Florida’s heat cycles.

Flexible Patch Filler

A flexible patch filler is applied to clean, dry cracks so the repair moves with the slab rather than cracking again.

Wrong Repair Scope

Spot-patching a court that needs full resurfacing, or quoting a full resurface when only a section is failing, wastes money and shortens surface life.

Depth-Based Diagnosis

Crack depth, drainage flow, and slip resistance are all checked so the repair scope matches the actual condition of the surface.

Common problems, answered

Scope of Work

What court resurfacing repair and maintenance covers

From a single cracked section to a full surface restoration, the work is scoped to what the court actually needs.

Surface Inspection & Drainage Check

Crack depth, coating adhesion, drainage flow, and slip resistance are assessed to confirm the right repair scope.

Pressure Washing & Mildew Removal

The court is cleaned down to bare, sound surface before any filler or coating is applied, removing algae and staining.

Crack Filling & Patch Repair

Flexible patch filler is worked into clean, dry cracks and damaged spots to restore a stable, even base layer.

Acrylic Recoating

Multiple passes of UV-stable acrylic coating are applied for a consistent finish that holds up to Florida sun and summer rain.

Line Striping & Court Markings

Faded or incorrect lines are re-marked to regulation dimensions once the coating has fully cured.

Spot Repair

Targeted fix for isolated cracks or peeling sections.

Full Resurfacing

Complete recoat when wear or damage covers the whole surface.

Multi-Sport Line Layout

Second game lines added in contrasting colors.

Ongoing Maintenance

Scheduled cleaning and inspection to catch damage early.

Surface Restoration

Restore a worn court without guessing at the scope

The right repair starts with knowing how deep the damage goes, not with assuming a full resurface is always needed.

A surface and drainage inspection is the first step. The builder checks crack depth and spread, coating adhesion, drainage flow, and slip resistance before recommending spot repair or full resurfacing. Skipping this step and going straight to recoating over failing substrate is the most common reason a resurfaced court deteriorates again within a season.

Crack filling uses a flexible patch filler applied to clean, dry surfaces. Pressure washing removes mildew, algae, and loose coating before any filler or acrylic is applied, Orlando’s humidity and heat cycles promote surface growth that prevents new coatings from bonding correctly. Once cured, acrylic recoating is applied in multiple passes for a consistent, UV-stable finish.

Line striping is the final stage. Faded or incorrect lines are re-marked to regulation dimensions after the coating cures fully. If the court is being converted to a different sport or adding a second game layout, line color selection is confirmed at this stage so contrasting colors read clearly under both daylight and artificial lighting.

Why Choose Us

Why Orlando Sports Courts for court resurfacing and repair?

Accountability and process specifics that matter when you are committing to repair work on an existing surface.

Inspection Before Any Quote

Every job starts with an on-site evaluation, no scope is quoted until the surface condition is confirmed in person.

Itemised Written Estimate

The written estimate lists every line item: cleaning, crack repair, recoating, and striping, nothing bundled or hidden.

Scope Matched to Damage

Spot repair and full resurfacing are both available so the work ordered matches what the surface actually needs.

Final Walkthrough Included

A walkthrough is completed before the job is signed off, confirming the surface, drainage, and lines meet the agreed spec.

Residential & Community Coverage

Backyard courts, HOA facilities, schools, and commercial properties are all within the service area across greater Orlando.

A completed sports court builder job at a house
A finished sports court builder project

The Process

From first contact to a playable surface

  1. 01

    Request an Evaluation

    Share your court’s location and the damage you can see, and we’ll arrange an on-site inspection at a time that works for you.

  2. 02

    Review Your Written Estimate

    After the inspection, you receive an itemised estimate covering every repair stage, cleaning, filling, recoating, and striping.

  3. 03

    Confirm Work & Final Walkthrough

    The builder completes the agreed scope and walks through the finished surface with you before the job is signed off.

Pricing Estimates

Typical Court Resurfacing Repairs & Maintenance Prices

JobTypical costTypical size
Minor crack repair$500-$2,000per court
Resurfacing a standard tennis court$4,000-$12,000per court
Full repair and resurfacing$8,000-$25,000per court
These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.
See all prices

Common Questions

Questions about court resurfacing, repair, and maintenance

Do cracks mean the whole court needs resurfacing?

Not always. Hairline or isolated cracks can often be filled and sealed without a full resurface, but widespread cracking across multiple zones usually signals base failure that spot repairs cannot fix. The deciding factor is whether the sub-base is still stable. An on-site evaluation will confirm which scope is appropriate before any work is quoted.

Can a patch or cleaner fix this, or do I need resurfacing repair?

A cleaner removes algae and surface grime but does nothing for structural damage. A patch works when damage is confined to one small area with a sound base underneath. If cracking, peeling, or drainage issues cover a significant portion of the court, resurfacing repair is the right scope, patching over a failing base just delays the same problem.

Why does my court keep cracking or peeling again after a repair?

Recurring cracks almost always mean the underlying cause was not addressed. Common culprits are base movement from sandy or poorly compacted soil, standing water that softens the sub-base, or a coating applied over a surface that was not properly cleaned and prepared. Fixing the surface without fixing the base or drainage produces the same result every time.

What happens during court resurfacing repair and maintenance?

The process starts with an on-site evaluation of the surface and drainage, followed by an itemised written estimate. Work then covers base preparation, crack filling, resurfacing or recoating, and line striping. A final walkthrough is completed before the job is signed off, so every scope item is confirmed on site rather than assumed.

Will the repair hold up in Florida sun and rain?

Yes, when the right acrylic or sport-surface coating is used and the base is properly prepared. Florida’s UV intensity and afternoon rain cycles accelerate wear on coatings that are applied too thin or over a damp surface. Correct surface prep and appropriate coating thickness are the two factors that determine how long the repair holds in this climate.

Is repainting enough, or do I need deeper repair first?

Repainting over a cracked or uneven surface traps the underlying damage and the new coat will peel within months. Deeper repair, crack filling and base stabilization, must come first. Once the surface is structurally sound, a fresh color coat and line striping will bond correctly and last as expected.

Can maintenance help keep a court from needing bigger repairs?

Yes. Regular cleaning removes organic buildup that traps moisture and accelerates surface breakdown. Catching and sealing small cracks early prevents water from reaching the base, where freeze-thaw cycles and soil movement cause the larger failures that require full resurfacing. Routine maintenance is consistently less costly than deferred repair.

Will the repair fix the cause of the damage, or just cover the wear?

Every job starts with an on-site evaluation of the surface and drainage, so the cause is identified before any work begins. If drainage or base issues are driving the damage, those are addressed in the scope. Covering wear without fixing the cause is not a repair, it is a delay.

More questions about Court Resurfacing Repairs & Maintenance?

Get Your Court Back to Safe, Even Play

Share your court’s location and what you’re seeing. We’ll arrange an on-site evaluation and a written estimate covering every repair line item, no commitment required.

Request an Evaluation