Skip to content

Outdoor Courts

Multi-Sport Court Installation in Orlando

One permanent court surface for basketball, pickleball, and more, built to last through every season.

  • On-Site Evaluation
  • Itemised Estimate
  • Final Walkthrough
  • Backyard to Commercial
An aerial view of newly constructed multi-sport courts, featuring bright blue basketball areas with orange dividing lines, adjacent to artificial green grass football pitches.

What Goes Wrong

The decisions that separate a court that works from one that doesn’t

Drainage Ignored

A base laid without grading for drainage pools water after rain and degrades the sub-base from below.

Graded Base First

The builder sets a consistent slope before any base material goes down, so water sheds clear of the playing surface.

Crowded Line Marking

Striping multiple sports onto a finished slab without prior layout planning leaves lines that overlap and confuse play.

Layout Planned Early

Sport placement and line colors are mapped at the design stage so every game reads clearly on the finished surface.

Wrong Surface Spec

A surface chosen without considering UV exposure and traffic level fades, softens, or cracks within a few seasons.

Surface Matched to Use

Synthetic tile or acrylic coating is specified for the sport mix, traffic level, and Orlando’s year-round sun exposure.

Scope Added Late

Fencing, lighting, and hoop installation scoped after the base is poured often require rework and add unplanned disruption.

Full Scope Upfront

Fencing, lighting, and accessories are included in the original plan so the build runs as one coordinated project.

Scope of Work

What a multi-sport court installation covers

From raw ground to a finished, lined court, every element of the build is handled as part of the same project.

Concrete & Asphalt Base Construction

A graded concrete or asphalt base is compacted and sloped for drainage before any surface layer is applied.

Synthetic Surface Installation

Synthetic sport court tile or acrylic coating is applied over the cured base, matched to the intended sports and traffic.

Multi-Sport Line Marking

Color-coded regulation lines for basketball, pickleball, and other games are laid out so each sport reads without conflict.

Perimeter Fencing & Court Lighting

Fencing and lighting are scoped and installed as part of the same project, not added as an afterthought.

Basketball Hoop Installation

In-ground or surface-mount hoop set to regulation height.

Drainage Setup

Subsurface drainage built into the base where the site needs it.

Site Grading

Ground leveled and shaped before base construction begins.

Resurfacing & Repair

Worn or cracked existing courts resurfaced to playing condition.

Multi-Sport Layout

One court surface that works for more than one game

A multi-sport court works when the layout is planned before the base goes in, not marked on whatever space is left.

Site assessment and grading come first. Central Florida lot sizes vary widely, so the builder measures the usable footprint and confirms drainage direction before a layout is drawn. The base, concrete or asphalt, is graded to a consistent slope that sheds water without affecting ball roll or court play.

Surface installation follows base cure. Synthetic sport court tile or acrylic coating is applied over the finished base, chosen for the use level and sport mix. Orlando’s year-round outdoor climate means UV stability and surface hardness both matter; the builder will specify the right surface layer for the intended sports and traffic.

Multi-sport line marking uses contrasting colors so each game reads clearly. Basketball and pickleball share a court without conflict when the layout is planned together, the objection that one sport’s lines crowd another is addressed at the design stage, not discovered after striping. Fencing, lighting, and hoop installation are scoped as part of the same project.

Why Choose Us

Why Orlando Sports Courts for multi-sport court installation?

Every project starts with a written scope and ends with a signed-off walkthrough, no open-ended commitments.

Written Estimate Before Any Work Starts

The itemised estimate covers base prep, surfacing, fencing, lighting, and line marking, no line item is left vague.

On-Site Evaluation Included

Every enquiry gets a site visit to assess space, drainage, and layout before a scope is written or a builder is arranged.

Final Walkthrough Before Sign-Off

The finished court is reviewed with you before the job closes, so every detail is confirmed on the ground, not over the phone.

Residential & Commercial Builds

The service covers backyard courts, HOA facilities, schools, and commercial properties across the greater Orlando area.

Resurfacing Available for Existing Courts

Worn or cracked courts can be resurfaced rather than rebuilt, assessed at the same on-site evaluation stage.

A completed sports court builder job at a house
A finished sports court builder project

The Process

From first enquiry to a finished, lined court

  1. 01

    Request an Evaluation

    Submit your site details and sport preferences; we arrange a free on-site visit to measure the space and check drainage.

  2. 02

    Review Your Written Estimate

    You receive an itemised estimate covering base work, surface, line marking, fencing, lighting, and any accessories scoped.

  3. 03

    Build, Line & Walk Through

    The builder completes grading, base, surface, and line marking, then walks the finished court with you before sign-off.

Pricing Estimates

Typical Multi-Sport Court Installation Prices

JobTypical costTypical size
Small backyard multi-sport court$20,000-$40,0001 court
Standard multi-sport court$30,000-$70,0001 court
Large premium multi-sport court$60,000-$120,0001 court
These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.
See all prices

Common Questions

Questions about multi-sport court installation in Orlando

How much does a multi-sport court cost?

Most multi-sport court installations in the Orlando area come in at $20,000-$40,000, depending on court size, surface type, and site conditions. Base preparation, fencing, and line marking all affect the final number. An on-site evaluation produces an itemised written estimate so you see every cost before committing.

What affects the quote for a multi-sport court?

Court size, surface material, number of sport layouts, fencing height, lighting, and existing site conditions all move the price. A yard that needs significant grading or drainage work adds more than a flat, well-drained lot. The itemised estimate breaks each element out so you can see exactly where the money goes.

Does the quote usually include grading, base work, and drainage?

Yes. The written estimate covers base preparation, surfacing, fencing, lighting, and line marking as separate line items. Grading and drainage are assessed during the on-site evaluation and included in the quote, so there are no hidden charges added later for work that was always part of the job.

What size court will fit my property?

A standard full basketball court needs roughly 94 by 50 feet; a pickleball court needs 60 by 30 feet. Many backyards fit a combined half-court layout in 50 by 40 feet or less. The on-site evaluation measures your usable space, accounts for setbacks and slopes, and recommends the largest practical layout. Plan your court design

Which sports can I fit into one court layout?

Basketball, pickleball, tennis, volleyball, and badminton lines can all be painted onto a single surface using different colors. The sports you can realistically combine depend on court dimensions. A 60 by 120 foot space handles tennis with pickleball overlaid; smaller lots suit basketball and pickleball together. The on-site evaluation maps out what fits.

Is a multi-sport court right for a small backyard?

A small backyard can still support a functional court, but the sport selection narrows as space shrinks. A 30 by 50 foot area works well for pickleball or a half-court basketball layout with one or two additional sport lines. The on-site evaluation confirms whether your yard can accommodate a usable surface without compromising drainage or setbacks.

What does the installation process usually involve?

Installation starts with an on-site evaluation covering space, drainage, and layout options, followed by an itemised written estimate. Once approved, the crew grades and compacts the base, installs drainage, lays the surface, adds fencing and lighting if included, then applies line marking. A final walkthrough confirms everything meets spec before the job is signed off. See design & prep details

How do I know the surface will not crack or pool water?

Cracking and pooling both trace back to base preparation. The on-site evaluation assesses soil stability, existing drainage, and slope before any surface goes down. The base is graded and compacted to spec so water sheds off the court rather than sitting on it. Proper base work is the single biggest factor in long-term surface performance.

More questions about Multi-Sport Court Installation?

Tell Us Your Site & Sport

Share the space and what you want to play. We’ll arrange an on-site evaluation and a written estimate covering every line item, no commitment required.

Request an Evaluation