Tennis Court Installation in Orlando

Most tennis court builds in the Orlando area come in at $25,000-$70,000, depending on site conditions, surface type, fencing, and lighting. A flat lot with easy access costs less than a site needing significant grading or drainage work. An on-site evaluation produces an itemised written estimate so you know exactly what each element costs before any work begins.

A full build covers site evaluation, base preparation, surfacing, fencing, lighting, and line marking. Every project starts with an on-site assessment of space and drainage, followed by an itemised written estimate for each element. A final walkthrough is completed before the job is signed off.

A regulation singles court is 78 feet long by 27 feet wide, but the full play area including run-off space needs roughly 120 by 60 feet. Most standard residential lots in the Orlando area can accommodate this if the yard is reasonably open. An on-site evaluation confirms whether your specific space works and flags any grading or drainage issues.

It depends on whether you have a clear run of at least 120 by 60 feet after accounting for setbacks and existing structures. Irregular lot shapes, trees, and utility easements all affect placement. An on-site evaluation maps the usable footprint and identifies the best orientation before any commitment is made.

A post-tension concrete slab with an acrylic coating is typically the most cost-effective long-term option because it resists cracking and needs minimal upkeep. Asphalt costs less upfront but requires more frequent resurfacing. Cutting corners on base preparation is where courts fail early, so the base is not the place to reduce the budget.

DIY tennis court construction almost always leads to base failures, drainage problems, and uneven surfaces that cost more to fix than the original build. Proper sub-base compaction, slope tolerances of 1 percent or less, and acrylic surfacing application all require specialized equipment. A properly scoped, written estimate protects the investment from the start.

Most sites need at least some grading to achieve the 1-percent slope required for surface drainage. Steeper or uneven lots require cut-and-fill earthwork before the base goes down. The on-site evaluation identifies the grading scope, and the written estimate breaks out that cost separately so there are no surprises.

The court surface is built to a precise 1-percent cross-slope so water sheets off rather than pooling. On sites with poor soil permeability or high water tables, perimeter French drains or channel drains are added beneath or around the slab. Drainage is assessed during the initial site evaluation before any base work begins.